DonQuixoteIII Posted December 10, 2018 Share Posted December 10, 2018 This is an old (er) thread so I hope someone can either answer or point me in a better direct I am using HDT-SMP physics (from HydrogenSays website, for SSE 1.5.53) and am having an issue where after so many minutes / so many load cell /doors /fast travels my FPS goes a bit batty - the FPS reported is a constant up-and-down blur. of numbers. (I am using FRAPS) If I save and restart it goes back to constant near-60 (where it is clamped AND vsynced in the INI's.) My GPU is a NVidia 1080 ti. My CPU is an i7 8700K mildly OC'd to 4.9 GHZ When I look at the performance on Skyrim Perf. Monitor, (run through MO2) the GPU performance is all over the place. The GPU graph looks like a seismograph. Always. The other graphs are all pretty stable, with the VRAM never going above 6GB Note: The GPU temps never go above 85c. Note also that the CPU never goes much above 35% (Of course, the SSE Perfmon leaves a LOT to be desired...) Now, my thought is that somehow the implementation of opencl on NVidia is not so good... To this end I have D / L'ed the latest opencl implementation for Intel CPU w / o GPU. My questions are twofold: 1, does anyone have any better thoughts as to why my system is going nuts after a while? And, secondly - If I go the CPU route, how do I disable the openCL implementation on my GPU? Link to comment Share on other sites More sharing options...
Fyrcynn Posted March 21, 2019 Share Posted March 21, 2019 Sorry for the confusion, but I'm a little lost on the install instructions. Could you please elaborate on what and where to download from the Intel website? I can't find any actual download links, and the few pages I did lead to asking me to open an Intel account with corporate info, real name and other stuff which I don't want to share with them. I can't in the first place, since I'm not a developer. Link to comment Share on other sites More sharing options...
treota Posted March 22, 2019 Author Share Posted March 22, 2019 https://downloadcenter.intel.com/download/28566/Intel-Graphics-Driver-for-Windows-10?product=80939https://downloadcenter.intel.com/download/28567/Intel-Graphics-Windows-10-DCH-DriversAssuming you are on windows 10 the above might be what you are looking for, depends on the hardware you have though. https://downloadcenter.intel.com/product/80939/Graphics-Drivers Supposedly the OpenCL runtime comes with the graphics drivers. If you are running a Radeon / AMD graphics card you probably don't need to bother with the intel drivers. If you are running SMP on Skyrim special edition you probably don't need to worry about the intel drivers either. Link to comment Share on other sites More sharing options...
Fyrcynn Posted March 22, 2019 Share Posted March 22, 2019 Running Windows 7, since 10 has loads of problems and I dislike that edition anyway. Still, thanks for the help. Link to comment Share on other sites More sharing options...
DartRevan Posted March 23, 2019 Share Posted March 23, 2019 (edited) If u get some trouble with HDT-PE+HDT-SMPTry to disable Quick Loot if u have itMore information here: https://forums.nexusmods.com/index.php?/topic/7504581-skyrim-le-se-strange-bugs/ Edited March 28, 2019 by DartRevan Link to comment Share on other sites More sharing options...
treota Posted March 24, 2019 Author Share Posted March 24, 2019 Nice, I'll add a link in the troubleshooting section. Link to comment Share on other sites More sharing options...
spaz490 Posted March 24, 2019 Share Posted March 24, 2019 rookie question. when applying links inside of the defaultbbp.xml instead of inside nifskope. How are meshes with 2 weights handled? Would i have to make 2 entries one for high one for low - e.g torso_0 and torso_1 Link to comment Share on other sites More sharing options...
treota Posted March 24, 2019 Author Share Posted March 24, 2019 If the two meshes have different names for their mesh then yes you most likely will need to add both. Link to comment Share on other sites More sharing options...
spaz490 Posted March 24, 2019 Share Posted March 24, 2019 TY, i just started using hdt-smp, far form being perfect but its amazing. it rely brings immersion to a hole new level, im glad its work was ported over and continued, just wish HDT/team would post on nexus again and help with troubleshooting and etc. Link to comment Share on other sites More sharing options...
Fyrcynn Posted March 24, 2019 Share Posted March 24, 2019 Is it just me, or there's no OpenCL 2.0 for i5-7400 on Windows 7? Link to comment Share on other sites More sharing options...
Recommended Posts