NVSE with FNV4GB

[pzkpfwTiger]

So I downloaded the NVSE compatible thing for FNV4GB but how do I install it?Because I get the same looking folder as the FNV4GB, I click on the 4gb loader and it first says that the exe is missing or sumthing o_O and when I play the NVSE doesnt seem to be loaded to.....so what did I wrong?>_<

[trog69]

So I downloaded the NVSE compatible thing for FNV4GB but how do I install it?Because I get the same looking folder as the FNV4GB, I click on the 4gb loader and it first says that the exe is missing or sumthing o_O and when I play the NVSE doesnt seem to be loaded to.....so what did I wrong?>_<

 

I can only give you the advice I was given, that was eventually fruitful; you have to go to the read-me files and documents that the mod authors have included, and follow the instructions completely. Then, you'll have to describe, in detail, exactly what you did, and where the files now reside, to show that, indeed, you've followed the instructions and for some reason your setup has caused an error.

 

Every time I've had problems, they've occurred because I did not follow the instructions as directed. Probably because I didn't understand the basic instruction terminology, but again, that still has to be detailed. As soon as I post a thread that only says "I installed....and it doesn't work", everyone knows that I can't be helped, because no one knows what I actually did.

 

Good luck.

[kevkiev]

Readme's are usually to be followed, for sure. But although It's been awhile since I dl'd NVSE 4GB I recall that, even though the readme states the files don't have to be in your game folder, it didn't work for me unless I put all files (the .exe,, the .dll and the source folder) in the main game folder (ie the one that holds the data folder). That's where I have it installed now and it works like a charm.

[pzkpfwTiger]

 

 

I can only give you the advice I was given, that was eventually fruitful; you have to go to the read-me files and documents that the mod authors have included, and follow the instructions completely. Then, you'll have to describe, in detail, exactly what you did, and where the files now reside, to show that, indeed, you've followed the instructions and for some reason your setup has caused an error.

 

Every time I've had problems, they've occurred because I did not follow the instructions as directed. Probably because I didn't understand the basic instruction terminology, but again, that still has to be detailed. As soon as I post a thread that only says "I installed....and it doesn't work", everyone knows that I can't be helped, because no one knows what I actually did.

 

Good luck.

Well I moved the files to no folder (since the read-me only said I needed to click the exe and that no further installation was needed), I do have the nvse files in my main folder...Do I have to delete those then?also I dont have the 4gb loader.

[pzkpfwTiger]

 

 

I can only give you the advice I was given, that was eventually fruitful; you have to go to the read-me files and documents that the mod authors have included, and follow the instructions completely. Then, you'll have to describe, in detail, exactly what you did, and where the files now reside, to show that, indeed, you've followed the instructions and for some reason your setup has caused an error.

 

Every time I've had problems, they've occurred because I did not follow the instructions as directed. Probably because I didn't understand the basic instruction terminology, but again, that still has to be detailed. As soon as I post a thread that only says "I installed....and it doesn't work", everyone knows that I can't be helped, because no one knows what I actually did.

 

Good luck.

Well I moved the files to no folder (since the read-me only said I needed to click the exe and that no further installation was needed), I do have the nvse files in my main folder...Do I have to delete those then?also I dont have the 4gb loader.

 

Edit: I found out what the problem was.....seems that I need to run it as administrator, but thanks anway.

also Sorry for the double post >_>

Edited February 5, 2012 by pzkpfwTiger

[Mckrty]

Has anyone had this problem with fnv4gb_nvse: I have tried using it with with just the short cut to the fnv4gb.exe and the folder and all files located on my C:\ drive.

 

I have also tried using it with fnv4gb.exe and fnv4gb_helper.dll in my game folder. I don't have a problem starting FONV in either case but the game locks up when I quit and will not return to the windows desk top unless I use task manager and kill the fnv4gb.exe process. Does anyone know what the fix is for this (if one exists.)

 

FONV Ultimate ED.

Windows 7 (6.1) Home Premium Edition (64 bit)

Service Pack 1 (Build 7601)

DirectX Version 11.0

Intel Core 2 Duo CPU P8800 @ 2.66GHz

NVIDIA GeForce GTX 260M 1024 MB

System RAM 4 GB

[camaro_69_327]

Hi,

 

First ..nice thread necro....post before yours is a year old...lol

 

Anyway my Understanding of the crash on exit is, the Game is trying to reference something that cant be found, a deleted reference or some such. I also had this problem, but is now gone, not sure if it was from cleaning the DLC's (in FNVEdit) or its because I use Stutter remover and have "Fast Exit" enabled.

 

SO 2 things to try to Fix

 

1) Stutter remover, besides having the "Fast Exit" option it really does help keep a fully modded Bethesda game running smooth. This includes Oblivion, Skyrim, Fallout. They all have that stutter and I for one see it, and it drives me nuts.

 

2) Google youtube videos on cleaning mods, (especially the Official DLC's) with FNVEdit. It is easy once you get the hang of it.

 

Edit:

 

To add.... I noticed you have a X64 OS and only have 4 GB ram, get to at least 8 GB if ya want to have a bunch of mods and have the Game running smooth. My system...Bragging follows...

 

With 96 mods running, and most texture packs, I can run my system up to 8.5 GB of system ram in use, This is with 2 (3 GB) 580's in SLI, The game itself will use ALL 4 GB a program is allowed to have, i can see this in process explorer, once the game is closed the ram drops a full 4 GB. With that many mods and textures my 580's humm along using 2 GB of Graphic goodness.

 

(For any nay sayers /unbeilvers i can and will post screenies, i did for oblivion) :)

Edited January 9, 2014 by camaro_69_327

[Mckrty]

Has anyone had this problem with fnv4gb_nvse: I have tried using it with with just the short cut to the fnv4gb.exe and the folder and all files located on my C:\ drive.

 

I have also tried using it with fnv4gb.exe and fnv4gb_helper.dll in my game folder. I don't have a problem starting FONV in either case but the game locks up when I quit and will not return to the windows desk top unless I use task manager and kill the fnv4gb.exe process. Does anyone know what the fix is for this (if one exists.)

 

FONV Ultimate ED.

Windows 7 (6.1) Home Premium Edition (64 bit)

Service Pack 1 (Build 7601)

DirectX Version 11.0

Intel Core 2 Duo CPU P8800 @ 2.66GHz

NVIDIA GeForce GTX 260M 1024 MB

System RAM 4 GB

Thanks for you'r response camaro

 

Yea, I know this topic is rather dated but I just recently started playing FONV again after aquiring a new copy of the Ultimate edition.

 

I have stutter remover installed but I was not aware of the "Fast Exit" setting, how do I enable this ?

 

As far as the 4gb of actual system memory, I would like to double up on that but in my research on the capabillity on this MB I have not found a cocncrete answer as to wether or not it can be upgraded.

 

Official word on this is that the board can only support 2 2x2s altough I have read posts that say they can be swaped out for 4x2s, Btw this is a Asus G60Vx RBBX05 in case you are curious.

 

I'm a bit leary about droping ~$200 on a 4x2 kit if I don't know for a fact they will fuction on this board.

 

One more question, I have seen many of Gophers' vid's on improving performance and decided to give FFNV a try. Turned out to be a bad choice so I removed the short cut and the files from the FONV game folder but im not sure if FakeFullscreen makes any changes to any of the .inis that need to be edited on removal, do you know?

[camaro_69_327]

Thanks for you'r response camaro

 

 

Yea, I know this topic is rather dated but I just recently started playing FONV again after aquiring a new copy of the Ultimate edition. Same here i was playing Oblivion/Skyrim Both since their release dates.

 

I have stutter remover installed but I was not aware of the "Fast Exit" setting, how do I enable this ? See Below

 

As far as the 4gb of actual system memory, I would like to double up on that but in my research on the capabillity on this MB I have not found a cocncrete answer as to wether or not it can be upgraded.

 

Official word on this is that the board can only support 2 2x2s altough I have read posts that say they can be swaped out for 4x2s, Btw this is a Asus G60Vx RBBX05 in case you are curious.

 

I'm a bit leary about droping ~$200 on a 4x2 kit if I don't know for a fact they will fuction on this board. ( I would be also)

 

One more question, I have seen many of Gophers' vid's on improving performance and decided to give FFNV a try. Turned out to be a bad choice so I removed the short cut and the files from the FONV game folder but im not sure if FakeFullscreen makes any changes to any of the .inis that need to be edited on removal, do you know? NO Clue, never Tried that one.

 

 

The INI for Stutter remover is in the NVSE\ plugins\ folder....mine is here...>>E:\Games\Steam\steamapps\common\Fallout New Vegas\Data\NVSE\Plugins

 

sr_New_Vegas_Stutter_Remover.dll This is the program. Don't Touch.

sr_New_Vegas_Stutter_Remover.ini This is what tells the program what to do. Edit this .

 

Open in any text editor (Notepad)

1= YES/ON

0 = NO/Off

 

The top section is the Main, and you can turn on /off everything from here. This is the top of my INI for Stutter Remover. Use as Reference only!

 

Master = {

_comment = You can turn on or off each distinct feature from here.

bManageFPS = 1

bHookCriticalSections = 1 (Default 0 )?

bHookHashtables = 1 (Default 0 ) ?

bReplaceHeap = 1 (Default was 0 can be finicky)

bLogToConsole = 0

bFix64Hertz = 1 (This is an important one make sure its ON)

bFastExit = 1<<<<(This is it!)

bFlushLog = 1

iSchedulingResolution = 1

bReplaceRandom = 1

bExperimentalStuff = 0<<<(Haven't had the time to Test this out yet.)

iMainHookPoint = 1

}

Hope this helps. Just remember what you have changed . :smile:

[Mckrty]

 

Thanks for you'r response camaro

 

 

Yea, I know this topic is rather dated but I just recently started playing FONV again after aquiring a new copy of the Ultimate edition. Same here i was playing Oblivion/Skyrim Both since their release dates.

 

I have stutter remover installed but I was not aware of the "Fast Exit" setting, how do I enable this ? See Below

 

As far as the 4gb of actual system memory, I would like to double up on that but in my research on the capabillity on this MB I have not found a cocncrete answer as to wether or not it can be upgraded.

 

Official word on this is that the board can only support 2 2x2s altough I have read posts that say they can be swaped out for 4x2s, Btw this is a Asus G60Vx RBBX05 in case you are curious.

 

I'm a bit leary about droping ~$200 on a 4x2 kit if I don't know for a fact they will fuction on this board. ( I would be also)

 

One more question, I have seen many of Gophers' vid's on improving performance and decided to give FFNV a try. Turned out to be a bad choice so I removed the short cut and the files from the FONV game folder but im not sure if FakeFullscreen makes any changes to any of the .inis that need to be edited on removal, do you know? NO Clue, never Tried that one.

 

 

The INI for Stutter remover is in the NVSE\ plugins\ folder....mine is here...>>E:\Games\Steam\steamapps\common\Fallout New Vegas\Data\NVSE\Plugins

 

sr_New_Vegas_Stutter_Remover.dll This is the program. Don't Touch.

sr_New_Vegas_Stutter_Remover.ini This is what tells the program what to do. Edit this .

 

Open in any text editor (Notepad)

1= YES/ON

0 = NO/Off

 

The top section is the Main, and you can turn on /off everything from here. This is the top of my INI for Stutter Remover. Use as Reference only!

 

Master = {

_comment = You can turn on or off each distinct feature from here.

bManageFPS = 1

bHookCriticalSections = 1 (Default 0 )?

bHookHashtables = 1 (Default 0 ) ?

bReplaceHeap = 1 (Default was 0 can be finicky)

bLogToConsole = 0

bFix64Hertz = 1 (This is an important one make sure its ON)

bFastExit = 1<<<<(This is it!)

bFlushLog = 1

iSchedulingResolution = 1

bReplaceRandom = 1

bExperimentalStuff = 0<<<(Haven't had the time to Test this out yet.)

iMainHookPoint = 1

}

Hope this helps. Just remember what you have changed .

Sweet, problem solved :dance: My sincere thanks for your tip man :thumbsup: