AidenPierce123 Posted September 29, 2020 Share Posted September 29, 2020 (edited) Hi guys good day, today i've done a fresh install of fallout 4, now after installed only Mod Organizer 2 and High FPS Physics Fix (https://www.nexusmods.com/fallout4/mods/44798) i'm encountering a bad LOD quality, poor draw distance and objects like rocks,bridges,cars,ecc.. not fully rendered, not everything is on ultra presets, what i've decreased was the shadow draw distance to medium and godrays to low, lens flaree and DOF deactivated, everything else is maxed on ultra watch the video to know what im talking about:https://imgur.com/a/DFUkgO5 Edited September 29, 2020 by AidenPierce123 Link to comment Share on other sites More sharing options...
HeyYou Posted September 30, 2020 Share Posted September 30, 2020 As I recall, there were some ini settings I had to tweak to make it work *right*..... But, I can't find the information again..... Link to comment Share on other sites More sharing options...
AidenPierce123 Posted September 30, 2020 Author Share Posted September 30, 2020 As I recall, there were some ini settings I had to tweak to make it work *right*..... But, I can't find the information again.....thanks for the reply first because you are the first that are helping me, seriously i've done a few post here and on reddit and bethesda fallout 4's forum no one said nothing, second soo the problem seems to be associated at a some ini. settings right? i hope somebody join the conversation and help me because i want to play with some mods, on pc it's boring playing vanilla and still have common problem, and it's not my fault after all :( hope you can remember the ini settings mean a good hand for me your reply <3 Link to comment Share on other sites More sharing options...
HeyYou Posted October 1, 2020 Share Posted October 1, 2020 Digging thru my ini, I have these: iTextureDegradeDistance0=1600iTextureDegradeDistance1=3000iTextureUpgradeDistance0=1200iTextureUpgradeDistance1=2400 and these a bit further down: fShadowLODMaxStartFade=1000.0fSpecularLODMaxStartFade=2000.0fLightLODMaxStartFade=3500.0 and then there are these: fMeshLODLevel1FadeDist=3500.0000fMeshLODLevel2FadeDist=2000.0000fMeshLODFadePercentDefault=1.2000 maybe these? fLODFadeOutMultObjects=4.5000fLODFadeOutMultItems=2.5000 These are in my falloutprefs.ini: fMeshLODFadePercentDefault=1.2000fMeshLODFadeBoundDefault=256.0000fMeshLODFadeScalar=1.0000fMeshLODLevel2FadeTreeDistance=2048.0000fMeshLODLevel1FadeTreeDistance=2844.0000fInteriorMeshLODLevel2FadeDist=1950.0000fInteriorMeshLODLevel1FadeDist=2600.0000fMeshLODLevel2FadeDist=999999.0000fMeshLODLevel1FadeDist=999999.0000 these are a bit further down: fTreeLoadDistance=75000.0000fBlockMaximumDistance=250000.0000fBlockLevel2Distance=110000.0000fBlockLevel1Distance=90000.0000fBlockLevel0Distance=60000.0000fSplitDistanceMult=1.5000 These are in my falloutcustom.ini iTextureUpgradeDistance1=2400iTextureUpgradeDistance0=1200iTextureDegradeDistance1=3000iTextureDegradeDistance0=1600 Check out what your values are, compare them to what I got. See if anything is different.... Worth a shot. :) Link to comment Share on other sites More sharing options...
AidenPierce123 Posted October 1, 2020 Author Share Posted October 1, 2020 (edited) Thanks first, second I'll try this settings when I'm home, let's hope this will fix this mess Edited October 1, 2020 by AidenPierce123 Link to comment Share on other sites More sharing options...
HeyYou Posted October 1, 2020 Share Posted October 1, 2020 Here's hopin'. :) Good Luck. Let me know if it works. Link to comment Share on other sites More sharing options...
AidenPierce123 Posted October 1, 2020 Author Share Posted October 1, 2020 Here's hopin'. :smile: Good Luck. Let me know if it works.you're good in time, sadly man i've tried but didn't work, the objects like rocks, bridges,road,grass ecc.... still got a render problem, some of my setting was the same as yours and for the other had different values from yours, so i've changed all the different settings in my ini but the problem still, idk what's the problem i'm so sad :( Link to comment Share on other sites More sharing options...
AidenPierce123 Posted October 1, 2020 Author Share Posted October 1, 2020 And after changed all of my settings according to yours settings, then i've launched as usual the game from f4se launcher and i've found this water glitch (?) https://imgur.com/a/Nsv5jdi Link to comment Share on other sites More sharing options...
edgeburner Posted October 1, 2020 Share Posted October 1, 2020 Have you tried running without that FPS/Physics mod? The reason I ask is because this game runs fine at 60fps. I run a 144hz G-Sync compatible monitor and was having inconsistent crashing issues until I lowered my refresh rate to 120hz, ( a multiple of 60hz) capped my frame-rate to 60fps with a mod named "load accelerator", and disabled V-sync across the "ini" board with this mod https://www.nexusmods.com/fallout4/mods/67 . I run about 7 hi-rez texture replacement mods and have had only minor flashing texture issues, and those are few and far between. No LOD issues. Just in case you decide to download BethINI..read the MO2 installation and pathing directions. Also, if you are a MO2 "rookie" all ini adjustments must be made via the MO2 ini tab....not the "my games" folder. Good luck.. Link to comment Share on other sites More sharing options...
AidenPierce123 Posted October 1, 2020 Author Share Posted October 1, 2020 Have you tried running without that FPS/Physics mod? The reason I ask is because this game runs fine at 60fps. I run a 144hz G-Sync compatible monitor and was having inconsistent crashing issues until I lowered my refresh rate to 120hz, ( a multiple of 60hz) capped my frame-rate to 60fps with a mod named "load accelerator", and disabled V-sync across the "ini" board with this mod https://www.nexusmods.com/fallout4/mods/67 . I run about 7 hi-rez texture replacement mods and have had only minor flashing texture issues, and those are few and far between. No LOD issues. Just in case you decide to download BethINI..read the MO2 installation and pathing directions. Also, if you are a MO2 "rookie" all ini adjustments must be made via the MO2 ini tab....not the "my games" folder. Good luck.. Hi man, thanks for the reply, i can try everything you want of course just to fix this horrible mess i'll try to follow your hint, and tell you as soon as i can what come out of the box :)ps: i know mod organizer 2 has it's own ini's file to use instead the vanilla ini's file <3 Link to comment Share on other sites More sharing options...
Recommended Posts