korun

yep sorry, i didn't see this detail, anyway, even you didn't have the legendary edition, S.T.E.P forum are also full of advise and tips where you can find a lot of usefull informations sometimes by the authors themselves, finally it will be usefull, DLCs are mandatory for almost all well known mods today. Welcome in the fun nightmare of modding Skyrim @@

Step by step ? : http://wiki.step-project.com/User:Neovalen/Skyrim_Revisited_-_Legendary_Edition @@

do you have change any value in Wildcat? if you did, revert back, if not, disable dynamic combat , and try with out then if you are staggered in combat you can't fight back for a few scds and it depends on your setup, they can kill you in one shot, was playing Legendary with Wildcat + AAE and with many opponents it's almost unplayable. also use TK dodge + rolling dodge it's really handy with combat mod. @@

are you using his skeleton or Xpms se? until everything became stable, use his, create a new char and see if it works as attended. Edit: there is a fix in the DL for Xpms SE [When install XPMSE after ECE, some sliders are invalidated, so these are skeletons to fix it. Just overwrites.] @@

re-install Skse as usual..Skse loader in game file , compress [data] file with Zzip or WinRar, open Nxm or Mo2 and activate [Data] like a mod, launch game via loader, open consol, and type this GetSKSEVersion , if it run properly you should have the version /Runtime /IDX from Skse Readme: Copy the .dll and .exe files to your Skyrim SE directory. This is usually in your Program Files folder under Steam\SteamApps\common\Skyrim Special Edition\. If you see files named SkyrimSE and SkyrimSELauncher, this is the correct folder. Do not copy these files to the Data folder as with a normal mod. The "src" folder is only useful for programmers, most users can ignore it. 2. Copy the .pex files in Data\Scripts\ into the Data\Scripts\ folder of your installation. The .pex files are needed by all users of SKSE. (best to Zip them and install as above)@@

..!del

the fix is already in use from this post and was on Reddit aswell https://forums.nexusmods.com/index.php?/topic/4988160-fix-to-anyone-who-experiences-low-framerates-fps-drops-in-skyrim-se/ then since last patch, i have 90 fps+ outside and 100+ inside, it's getting better, still a loss but it's stable at least @@

my bad, SkyrimTuner..............well Realvision list

it's not i don't want to help, but RivaTunner's list is one of the most complete about the best mods for skyrim, then check the full Realvision preset, it's not for every rig aswell. Follow all his tips on install for a maximum fun @@

Enb and mods are completely different thing, you can use any and every Enb preset with Real vision list, it's just a list.. of mods on Nexus he use for his game. Edit: if i was you with your specs, i would stick to Real vision, Sharpshooter is beautifull and a Fps killer as well

you've never used , Erzo mighty dragon + Deadly dragon + DCO or SkyRe, this whole package was made for Skyrim to be a nightmare, dragons were un-leveled (by choice), you could have any kind of dragons from lowll to legendary except Alduin spawning, they can stagger, always fly, spawn by X number ( by choice), you could change there resistances to magic, physique, anything: i've a Screenshot of 8 dragons over Whiterun, if cities could be destroyed, Whiterun would be ashes, you could spend countless time to get rid of them .http://www.nexusmods.com/skyrim/images/472211/? http://www.nexusmods.com/skyrim/images/472513/? Little patience you say, 2 Screenshots it started by night and ended next day (ig hr) @@

Project Parallax need a Enb to work, without, it can't have the 3 D effect, then they are specific textures, so probably won't work with the new engine . @@

Enb's were made for games that really need some inprovement at the time, Boris didn't create the Enb specifically for Skyrim^^, he had to make it compatible. Then as stated on his forum, it's not sure he will develop a new one.

@Saurus i've installed UNP for SSE + Valhalla for SSE and it works perfect

this one too @@

IE3 you are my hero of the day, it works perfect, it goes up to 55 » Whiterun stables. it was incredible, i came from 50+ outdoor (Skyrim Legendary HDmodded) to 30 fps average without any mods in SSE Oo there is a loss, but, this is way better. Thks again @@

-Realistic Water Two -Tamriel Reloaded HD - like vivid +Vivid Landscapes - All in One - do exactly the same as Tamriel hd +Project Parallax Remastered - like both of above -NobleSkyrimMod HD-2K - this one is a fps killer more than the others -Static Mesh Improvement Mod - since is all in one it's more friendly and ......Enhanced Landscapes, + ENB = all of them :P , with your load order you'll never ever have more than what you have right now, let say it's pretty good, i assume 25fps it's in the Whiterun toundra or the marsh near Solitude, 45 in interior, just trim it a bit :D, or just use the parts which each other doesn't cover, it's a bit tricky but if you use MO it's easy i would say get rid of 2 landscape overhaul or more and push Dyndolod to high, for better looking^^, @@

i7 4790k OC to 4.6 GHZ even standard it's a overkill for Skyrim as said in other post the bottleneck is Skyrim itself try Ewi's .inis (real vision dl page) but no miracle here then if you use only 2k texture, use only one 980 instead, i've had better result with 1 x 980 TI than Sli, because Skyrim engine isn't friendly with sli setup aswell @@

1st sorry, i've read your post to fast :) then in your .ini : fAutosaveEveryXMins =15.0000. you probably crash on auto save which is a long known bug for many players, disable ingame all saving setup, keep just the last and set it to 60 min. you'll have to save manually then but it's worth the try :) @@

your rig isn't weak, not really powerful but it can run all your mod without a problem. here is my advise, Purity + Sfo + Smim bundle is a fps killer, try to choose , go with Purity + Sfo even Sfo is really heavy now because it's a laptop, your main problem is heat and performance setup, i'm pretty sure that's why it shut down every 15 mins, if it was the game it should be random! go in the setup panel and create a high perf profile, you must be plug in not on battery and set every thing to the high lvl, no stand by etc.., most important HDD and CPU go in NVIDIA setup change for single screen perf and power mode to full power @@

If removal via NMM fails »»»»»»»a manual removal can be performed as follows: 1. Delete the following folder from your Skyrim install directory: 'Data\meshes\Actors\Character\_1st person' 2. Delete 'The Joy of Perspective.esp' 3. Delete SKSE/Plugins/SKSE_JoyOfPerspective.dll have you uninstall like said by the mod author above? it's completely unbelievable you will reinstall a full game just for a so small mod, it's not a overhaul. uninstalling mods isn't in any way a Vanilla install, Joy of perspective is a DLL + meshes /.ESP, with a true Vanilla game you should have new ini'S, only the game and no more problems. no Skse = no plugin, 0 meshes, 0 .esp. check if nothing remain in your file, Skyrim/Data/Skse/plugin skyrim/Data/Meshes/actors/character/1st_person Skyrim/Data/Joy of Perspective.esp True Vanilla game if you still want to scrap everything :smile: @@

you didn't say for your setup, so i assumed it was weak :D COT weather patch»»»it's in the description page, you have to use his night lvl instead of COT, but no ctd, it's just differences between lighting quality and brightness »»»»»MemoryBlock.log if you use any Enb, Enb boost is in the EnbLocal.ini, with Real Vision, it's made by the RV installer, you have a reminder when you finish the install :smile:, but , if you have >8gb ram and vram »» use all your vidéo memory instead less 170 with W7 »»»right clic your screen»»screen setup»»»advanced»»total video mem For AP do what you want :D it's just the master bed which isn't anymore in the right position for AP so it can cause a weird glitch, man if you ever see my LO :wink: @@ Edit: you must use enb 0.279, it will tell you right on the screen on load how much Video mem are available for Skyrim, whatever ini setting you have

logs form MemoBlockLog are in C:/.............common/skyrimData/Skse/plugin log from Skse are in c:/username/my docs/my game/skyrim/skse @@

yw :)

Amidianborn Texture, réinstall with Cabal cut»»all @@