Jump to content

The last poster wins


TheCalliton

Recommended Posts

I don't know, I find homosexuality normal for both animals and humans, I don't believe it's a hormone change or something like that, maybe genetics or mutations but I'm unsure. Lack of reproduction need may have an influence in that, the psychological factor is important in the matter, but I honestly don't know what factor, or combination of multiple factors, causes it. :confused:

 

Doesn't matter anyway, every human is what he is, doesn't matter why. :thumbsup:

I'd just like to know why really, out of curiosity and knowledge mostly. I'm not really heaving an identity crisis or anything, I just like to know things. :P

And I do want to have kids of my own, so it's not really the lack of reproduction need. Idk either, is why I'm asking. I like to theorize with people :smile: talking about intelligent things is awesome :biggrin: sadly my peers in school aren't quite up to that yet sadly.

 

That's why I love all you guys and girls here. We should build an asylum somewhere in Europe and call it The Nexus Asylum, where we'd have meetings every few months.

 

Also Martinis in Dalmatia are expensive and they come in tiny amounts :( I miss the quality of stuff that I have back home, the atmosphere is amazing though as always :biggrin:

Link to comment
Share on other sites

Yes we can be the most informed people on the nexus if you allow us, it depends on the subject and how much info you need. We are the collective minds of the internetz.

Edited by Thor.
Link to comment
Share on other sites

Section A1: Have you checked the ini file of Mother 3.0 ? under the entry Children ="X" is the number of how many different versions of the program Child are supported till the OS of Mother 3.0 crashes to black screen and needs support from a specialist th programs Psychotherapy 7.6 and Sedation 4.6 might get that fixed. Additional versions of the program Child need to be supported by your Internet account and kill a loot of speed. Father 3.0 should upgraded with NERV 3.0 , additional an fresh restored back-up of the data of the old dos file ASIWASACHILD.COM for reference might helpful with supplementary programs of Patience 1.8, Coolness V8.1 and EXpecttheunexpected.bat to patch Father 3.0 to Father 3.2 or even if you are an expert with these programs to Good_Father 2.4.

Good addons for the child program that could be early installed, if it reaches stage 01 or stage 02, is Curiosity 1.0 in combination with Playfully 2.1a and Interesting_TUT V4.01. Those are very good development programs that make the child program more adaptable for further stages in development.

Yes, we checked the ini, Mother 3.0 should be able to support up to 4 instances of Child processes simultaneously, however further forking of the submodule could result in instability of Mother 3.0, but we have a failsafe ready for Father 3.0 to distribute the system load. NERV 3.0 under Father 3.0 is replaced by a Valium 1.3 support driver, performance is better than expected. :biggrin:

 

Some modules have been swapped out and rolled into the mainstream version, ASIWASACHILD.COM was completely replaced by I'm_Still_A_Big_Child-3.2.7.tar.bz2 source package early in development while Patience 1.8, Coolness V8.1 and Expecttheunexpected.bat are merged into a single Awesomeness-1.3-dev.deb package. Baby_Holding-0.3.3 and Changing-Diapers-0.1.2 still need further development.

 

We believe we will be able to successfully implement Curiosity, Playfully and Interesting_TUT into Child 1.0 and further develop the software until Child package reaches maturity, it will then be actively developed by the community as well. We also agreed that Child 1.x could work better by implementing other Child processes somewhere during OS development, like Child 2.x and 3.x.

 

So far the biggest concern was the output of Gynecologist-1.1 system scanning software, however it reports an excellent integrity and health status. There was also a problem with the Money 4.7 package but we solved that issue by upgrading and multiplying process input modules. :happy:

 

Now the only issue is that the system experiences the "Nervousness" type 1 error while compiling the submodule Child, but the compiling finishes successfully each time regardless. We still didn't receive a response from modprobe of the Child submodule, we believe it would take 2-3 weeks before it integrates completely and in the meantime, we'll continue compiling until we receive a result. :cool:

 

As you may know too with the Girlfriend 1.9 OS additional programs are installed as beta version ( Mother 1.5 beta and Father 1.8 beta). theses are later upgraded with the implementation of the OS Wife 2.0.3 to Mother- in-law 2.22 and Father-in law 2.7.2. . Normally Father-in law 2.7.2. can be with a view tweaks upgrated to Father-in law 2.8.2. without any loss of performance but Mother- in-law 2.22 is in 80% of cases a buged program. trying to get rid of the program via crude deletion programs as Rifle.1.23 or Knife 6.66 beta and Accident 0.5 beta aren't recommended and result always in a total system failure. The most elegant and effective way to get rid of a buged Mother- in-law 2.22 is the use of Psychotherapy 7.6 and Sedimentation 4.6. However those programs need an expert to be installed correctly other wise the bugs return to make complications with the installed OS.

 

Other problems i don't see for now . i hope this was to a degree helpful

Father-in-law is actually upgraded to version 3.1.8 with a 35% gain in performance. Mother-in-law is patched up to 2.8.2 but it's still bug-ridden. While the development team disagrees with purging the Mother-in-law package and upgrading Father-in-law to 3.7 to compensate, the Husband 2.0.3 has been upgraded with a submodule Zastava_M93-50.cal for Mother-in-law package removal, just in case. :devil:

 

Though we have found a temporary fix for the bugged software. We found that giving Father-in-law a Beer-6.0 package results in a conflict between Father-in-law and Mother-in-law packages and bug neutralization. The Beer-6.0 is a package with high performance and low system requirements, the downside is that it needs to be reinstalled once the bugs occur again. The upside is that while Beer-6.0 is active, Mother-in-law performance output is increased by 200%. :woot:

 

Psychotherapy and Sedimentation packages are removed completely from online repositories, instead we implemented a They_Live_6000_Km_Away_From_Us_And_Come_Only_3_Times_a_Year.deb package once the OS version was raised to Friends 0.7.1. That is a package that insures a lot of stability in the system. :thumbsup:

 

As I said, development is excellent and we're making quality software here. :yes:

 

Also Martinis in Dalmatia are expensive and they come in tiny amounts

This is Dalmatia, martinis are for tourists while Rakia and home-made wine are for those who actually live here and those who know how to get the two.

Link to comment
Share on other sites

This is Dalmatia, martinis are for tourists while Rakia and home-made wine are for those who actually live here and those who know how to get the two.

We have both here don't you worry :biggrin:

 

I just really really like Martinis xD

Link to comment
Share on other sites

 

Section A1: Have you checked the ini file of Mother 3.0 ? under the entry Children ="X" is the number of how many different versions of the program Child are supported till the OS of Mother 3.0 crashes to black screen and needs support from a specialist th programs Psychotherapy 7.6 and Sedation 4.6 might get that fixed. Additional versions of the program Child need to be supported by your Internet account and kill a loot of speed. Father 3.0 should upgraded with NERV 3.0 , additional an fresh restored back-up of the data of the old dos file ASIWASACHILD.COM for reference might helpful with supplementary programs of Patience 1.8, Coolness V8.1 and EXpecttheunexpected.bat to patch Father 3.0 to Father 3.2 or even if you are an expert with these programs to Good_Father 2.4.

Good addons for the child program that could be early installed, if it reaches stage 01 or stage 02, is Curiosity 1.0 in combination with Playfully 2.1a and Interesting_TUT V4.01. Those are very good development programs that make the child program more adaptable for further stages in development.

Yes, we checked the ini, Mother 3.0 should be able to support up to 4 instances of Child processes simultaneously, however further forking of the submodule could result in instability of Mother 3.0, but we have a failsafe ready for Father 3.0 to distribute the system load. NERV 3.0 under Father 3.0 is replaced by a Valium 1.3 support driver, performance is better than expected. :biggrin:

One hint: Valium 1.3 and runing the driver Viagra 2.0 will set Father3.0 to constant rebot mode until subscripts in data Folder dontMix have run all scripts of the hornyhibernation .sh. It is not adviced or nessary to run both drivers at the same time on Father 3.0 :mellow:

Some modules have been swapped out and rolled into the mainstream version, ASIWASACHILD.COM was completely replaced by I'm_Still_A_Big_Child-3.2.7.tar.bz2 source package early in development while Patience 1.8, Coolness V8.1 and Expecttheunexpected.bat are merged into a single Awesomeness-1.3-dev.deb package. Baby_Holding-0.3.3 and Changing-Diapers-0.1.2 still need further development.

 

ASIWASACHILD.COM can be recompiled and itegrated for I'm_Still_A_Big_Child-3.2.7.tar.bz2 the advantage is that the data can be set to spit screen in or on run on two monitors at the same time while the complex package child_rearing-1.2.3 is runing simultaniusly which will result in a better preformance of the Awersomeness-1.3-dev.deb package by at least 20%. :whistling:

Baby_Holding-0.3.3 gets easy if you find out the specific comandline parameters to set baby to sleep modus; thsi is will get child 1.0 to silencer modus whitch is less noisy. Unfortunatly aditonal versions of the Child program may require some tweaks and twists of the parameters set. :thumbsup:

Changing-Diapers-0.1.2 ist recomendet to run with Protectshunglasses_100%Watertight.sh and Facemask_100%.sh or you can use the combined script of Gasmask.sh and itis also recomended to have either the scripts Water-2U.sh and Soap-2U.sh or rubber-gloves4U.sh. I suggset testing of ancient Poweder.sh for incompatibilities before starting its use on the 1st run. :nuke:

Changing-Diapers-0.1.2 can be Simulated with the application of BabydollNo.8 v1 if there is any old version still instald in the program Household.2ndchance. 3.2.1 (this might be instaled with Wife 2.0 somewhere and it is mostly ancient) there one major diffrence between the two progreams you should be aware of, BabydollNo.8 v1 is stactic on surface while the later use of Changing-Diapers-0.1.2 is on a dynamic surface of child 1.0. :ermm:

We believe we will be able to successfully implement Curiosity, Playfully and Interesting_TUT into Child 1.0 and further develop the software until Child package reaches maturity, it will then be actively developed by the community as well. We also agreed that Child 1.x could work better by implementing other Child processes somewhere during OS development, like Child 2.x and 3.x.

Sounds :cool:, but the comuntiy development can start earlier with the implementation of SCHOOL 1.0 and then step by step more and more till maturety archivement is unlocked.

So far the biggest concern was the output of Gynecologist-1.1 system scanning software, however it reports an excellent integrity and health status. There was also a problem with the Money 4.7 package but we solved that issue by upgrading and multiplying process input modules. :happy:

Sounds Nasty. :psyduck:

Now the only issue is that the system experiences the "Nervousness" type 1 error while compiling the submodule Child, but the compiling finishes successfully each time regardless. We still didn't receive a response from modprobe of the Child submodule, we believe it would take 2-3 weeks before it integrates completely and in the meantime, we'll continue compiling until we receive a result. :cool:

If it dosn't work at first dont be discuraged recompiling is possible. I don't need to metion more becasue I know you are an expirenced user.

 

As you may know too with the Girlfriend 1.9 OS additional programs are installed as beta version ( Mother 1.5 beta and Father 1.8 beta). theses are later upgraded with the implementation of the OS Wife 2.0.3 to Mother- in-law 2.22 and Father-in law 2.7.2. . Normally Father-in law 2.7.2. can be with a view tweaks upgrated to Father-in law 2.8.2. without any loss of performance but Mother- in-law 2.22 is in 80% of cases a buged program. trying to get rid of the program via crude deletion programs as Rifle.1.23 or Knife 6.66 beta and Accident 0.5 beta aren't recommended and result always in a total system failure. The most elegant and effective way to get rid of a buged Mother- in-law 2.22 is the use of Psychotherapy 7.6 and Sedimentation 4.6. However those programs need an expert to be installed correctly other wise the bugs return to make complications with the installed OS.

 

Other problems i don't see for now . i hope this was to a degree helpful

Father-in-law is actually upgraded to version 3.1.8 with a 35% gain in performance. Mother-in-law is patched up to 2.8.2 but it's still bug-ridden. While the development team disagrees with purging the Mother-in-law package and upgrading Father-in-law to 3.7 to compensate, the Husband 2.0.3 has been upgraded with a submodule Zastava_M93-50.cal for Mother-in-law package removal, just in case. :devil:

Normaly the beta version of Father-in-law is bugriden till you upgrade your OS to Wife 2.0 the patch instaled with Wife 2.0 solves 90% problems and the rest is easy accessibel through some tweaks. :ermm:

Though we have found a temporary fix for the bugged software. We found that giving Father-in-law a Beer-6.0 package results in a conflict between Father-in-law and Mother-in-law packages and bug neutralization. The Beer-6.0 is a package with high performance and low system requirements, the downside is that it needs to be reinstalled once the bugs occur again. The upside is that while Beer-6.0 is active, Mother-in-law performance output is increased by 200%. :woot:

 

Beer-6.0 is rather slow working package. local generated packages are available form various distrubutors. For my own knowlege I endorse one of the following packages:

Badel_šljivovica 1.0

Kruškovac_Svatovski 1.0

NIM_Julischka 3.0

Using all together will result in a compiled package HorribleHangover.6.4.dev.deb and will get either Mother-in-law package into whisper modus or shouting mode (depends on general settings of Mother-in-law). :dry:

 

Another evil solution for a buged Mother-in-law is the following :

if Mother-in-law pakage asks for implemetaion of the script nonalcoholicDRINK01.sh you recompile the following scripts with the last package in the list:

StandartnonalcoholicDrinkinbottle.sh

emtyglas.sh

Akvinta_Vodka v02cl package

the result might be repeated some more with aditional recomnpilation of aditonal nonalcoholicDRINK.sh the effect will be someway like this packages Funnycomments.TG2.0

Giggles 4.7

DanceonTable. 1.8

fallfromTable 0.99

The interface structure of Mother-in-law is much more accessible through this procedure. However the bugs of Mother-in-law are reduced or diverted to some usefullness and might be fun to watch. ;D

Psychotherapy and Sedimentation packages are removed completely from online repositories, instead we implemented a They_Live_6000_Km_Away_From_Us_And_Come_Only_3_Times_a_Year.deb package once the OS version was raised to Friends 0.7.1. That is a package that insures a lot of stability in the system. :thumbsup:

 

As I said, development is excellent and we're making quality software here. :yes:

I hope only you are realeasing in time and the pie isn't a lie. :biggrin:

 

 

Also Martinis in Dalmatia are expensive and they come in tiny amounts

This is Dalmatia, martinis are for tourists while Rakia and home-made wine are for those who actually live here and those who know how to get the two.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...