Drax8

Automatic Variants is pretty intensive, especially for your gpu. But I know I can't play without it anymore, but given your situation I think you would be better off ditching it. Also, drop SafetyLoad, I assume you are using SKSE and the memory fix for ENBoost? SafetyLoad causes problems like CTD's in menus and looting and isn't needed if using the SKSE memory fix.

First thing I notice is your Dual Sheath Redux.esp is out of place, that should be much higher in your load order, only the Dual Sheath Redux Patch.esp should be bellow your bashed patch. Also since you are using Complete Crafting Overhaul Remade, you dont need the jaysus .esm and .esp, you can remove those and CCOR will handle it for you. No idea if this will help but those are some things to look at.

That is a commom problem. All you need is the ShowRaceMenu Precache killer: http://www.nexusmods.com/skyrim/mods/33526/? Should fix your issue. Good luck!

I am currently using: PerMa Duel Combat Evolved Revenge of the Enemies ASIS Immersive Creatures High Level Enemies (Immersive Creatures Version) Animal Tweaks Deadly Dragons Dragon Comabt Overhaul SkyRe Encounter zones SkyRe Enemy Scaling Makes for some fun and challenging fights, and have gotten my ass kicked a few times! Multiple followers required for several fights!

Alot of great names on the list so far. Would like to add Elianora and TairenSoul, though I don't think TairenSoul is still modding, but her tattoos are epic.

Oh no worries, just open up Wrye Bash, right click on your Bashed Patch (make sure its at the bottom of your load order) and click on "Rebuild Patch". A box will pop up, on the bottom left there will be a button that says "Build Patch", click that and let the magic happen. Once it's done, click "OK", and voila, a rebuilt patch. It's very easy.

First thing I notice is your Unofficial Patches are out of place, they should be like this: Skyrim.esm Update.esm Unofficial Skyrim Patch.esp Dawnguard.esm Unofficial Dawnguard Patch.esp Hearthfires.esm Unofficial Hearthfires Patch.esp Dragonborn.esm Unofficial Dragonborn Patch.esp The next thing I notice is your Bashed Patch should be at the very bottom of that load order. Make these changes, rebuild your Bashed Patch, and see if that helps at all.

Hi sevencardz, this sounds intriguing! Here's an issue I've had with Convenient Horses, that maybe you could look at for your mod. I would always use the option to increase horses speed in the CH MCM menu, and it worked great. However, when I acquire Arvak and ride him, he is not subject that speed increase. Furthermore, riding Arvak would break the speed increase for any other horse I rode, reducing them to the vanilla rate, and no matter what changes I made in the CH MCM menu, I could not get the horses to run faster anymore. So now I only get Arvak as a trophy, and never ride him. That sucks. Anyway, that's all I got for now, will keep an eye on this! Thanks!

I would highly recommend dropping Claralux and getiing Lanterns of Skyrim instead. Claralux causes lots of problems, Lanterns of Skyrim does not. Nuff said. I also highly recommend iHUD (Immersive Hud) by Gopher. Outstanding mod. I also suggest the trio of Complete Crafting Overhaul Remade, Weapons and Armor Fixes Remade, and Clothing and Clutter Fixes, all by Kryptopyr. Just a couple of ideas. Oh and I cannot play without Automatic Variants, but thats just me :)

Did you make sure to add these lines to your skse.ini? [Memory]DefaultHeapInitialAllocMB=768ScrapHeapSizeMB=256 You have to add these or it wont be of any use.

Yeah it happens every time now. I will try loading a save from before I enter Apocrypha and see what happens.

I'm having an issue with the final battle vs Miraak, what I realized is happening is, when I damage him low enough the first time and he is supposed to absorb a dragon soul, I am actually absorbing the soul. He teleports to to the middle, and stays in ethereal mode indefinitely. Nothing I am trying is working. I have not had this issue before. Any help would be appreciated!

Yes leave it in the SKSE folder.

No worries, in your Skyrim/Data folder do you have an SKSE folder? You should since you previously used Safety Load, and that's where it's plugin went. Inside the SKSE folder, right click, then select new, then create text document, rename it to SKSE.ini, and voila, you are good to go. Just copy/paste the lines I showed you above. And it's not silly at all, we all had to learn sometime :)

Yes either use SKSE Alpha or SSME, not both :) Make sure you install the SKSE correctly, and you will need to add this to your SKSE.ini: [Memory]DefaultHeapInitialAllocMB=768ScrapHeapSizeMB=256 If you don't add this, it won't work. If you don't have an SKSE.ini, simply create one and add the lines :)

A couple of things stand out to me right off the bat. First, I can almost guarantee that some of the CTD's you are having when pushing buttons, going into inventory, maps, game menu etc. is due to Safety Load. It doesn't play nice with SkyUI. I had that exact same issue. I used to be plagued by freezes, then Safety Load came, and it eliminated my freezes (I'm talking in game complete freeze needing a ctrl-alt-del to kill the program, not ILS) but gave me random CTD's because of the conflict. Next, I suspect you have over modded what your graphics card can handle. Especially since it's a 1GB card. You will likely need to cut down your mod list, and/or start saving your pennies for an upgrade if you are dead set on modding big. I realize you do not have a huge mod list, but there are some pretty taxing mods in there (Frostfall, Wet and Cold, Footprints, Immersive Creatures, etc). All great mods, and I use them too, but if you don't have the horsepower, they will cripple your game. Now, some things to try that might help (forgive me if you mentioned these in your post, I might have missed it) are 1.) ENBoost. You don't have to run a ENB preset with this to get the benefit from ENBoost. and 2.) SSME -Skyrim Startup Memory Editor. These go hand in hand, and will replace Safety Load. Alternatively you can use the SKSE 1.7 Alpha instead of SSME, which is what I am using and works wonderfully. Hopefully this helps some, if I repeated things you already know I'm sorry, just trying to help :) Good luck!

I've been trying the LOOT program out, and I really like it. Here's some things of note to consider. It works very well, but you will have to get used to your load order looking completely different than it did with the original BOSS program. It's quite jarring at first, but that doesn't mean it's wrong. It's just a different way of doing things. What really sells it for me, and I may be in the minority on this, is that I have started making a lot of merged patches of mods using the TES5Edit merge script on Nexus: http://www.nexusmods.com/skyrim/mods/37981/? I have merged in some cases over 20 plugins into 1. So I am able to use many more mods than I previously could have. The problem with BOSS is that it won't know where to put these, and will be unrecognized. However LOOT looks at it and places it according to what it does, so it is placed correctly and I don't have to worry about it. My game is perfectly stable and that's all that matters to me.

Nothing wrong with that Rennn :) Just like you said, try them in game, won't break anything or hurt to try. Find what you like and enjoy!

I agree with calfurius, after using the AmidianBorn Book of Silence mods, there is no way I could go back to using vanilla textures. It just blows them away. The difference, in my opinion, is staggering. Again, just my opinion.

SkyUI is still way better than vanilla when used with a controller. I would never not use it because of using a controller. It's just a better UI all the way around.

Question, are you using Dragon Combat Overhaul? While not totally caused by this mod (it is a vanilla bug), DCO magnifies this problem. The only thing I know to do at this point is target the dead dragon, open the console, and type "markfordelete" without the quotes. SAVE BEFORE YOU DO THIS AND MAKE SURE YOU HAVE THE DRAGON TARGETED!!! Close the console, and voila, dead dragon gone :)

Thanks Dark0ne, it's just since this morning for me, so will be patient and wait :) Thanks for the heads up!

Same problem here.

Kind of depends on the rest of your system and how heavily modded your game is. In my case I have an [email protected] ghz, 16 GB of RAM, and a EVGA GTX 670 4GB, and use a lot of high res texture mods (a mix of 1024 and 2048), SMIM, and Seasons of Skyrim ENB, and I get solid 60 FPS except for in the most demanding areas, which affect everyone. My settings are set to Ultra except for shadows which are at High. So there are options depending on your setup and mod list that aren't over the top expensive to get 60 FPS :)

Good job dude, don't take it too hard, you can't please everyone!